Union Shaft Flange for Couplings – USC-Cxx
“Union Shafts” Flanges are suitable for most torquemeter anges.
The preferred installation direction is to mount the damper to the engine and the shaft to the torquemeter at the dynometer.
For this installation please use the USF-Sxx to mount the shaft to the dyno-side.
If the damper is installed to the dynometer, please use the USF-Cxx flange to mount the coupling to the torquemeter at the dyno.
If the damper is installed to the engine, please refer to our flanges for shafts to mount the shaft to the dynometer, which would be the preferred installation direction.
